4 PVC SEWER BACKWATER VALVE
SKU: 7690597
Installed in an PVC white sewer piping drainage system to provide waste water backflow protection to fixtures and floor drains, below the flood plane. Provided with a rubber o-ring, and cap.
Normally used in the drainage portion of the sewer system only | Flame retardant, will not support combustion in the presence of an ignition source | Use approved PVC primer and solvent cement to make PVC Jo ints | Hand tighten lid plus a half turn provides a complete seal | Can be buried up to 16" when used with a Canplas backwater valve sleeve Kit | Comes complete with o-ring, | Maximum service temperature rated at (140F) +60C | Injection molded in non-toxic durable white polyvinyl chloride (PVC)
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DSd8cc8827-4411-4707-9fc4-f185ad80c7b3 | Manufacturer Web Site: https://canplas.com/ | Manufacturer Web Site: http://www.canplas.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.