4 PVC SEWER STREET 22-1/2 ELBOW
SKU: 7690510
Installed in a PVC white sewer piping system to allow for a 1/16 or 22-1/2 degree change of direction from vertical to horizontal or horizontal to horizontal. A conversion fitting that changes the piping system from a hub to a spigot or a spigot to a hub termination.
Injection molded in non-toxic durable white polyvinyl chloride (PVC) | High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive med ia | Maximum service temperature rated at (140F) +60C | Use approved PVC primer and solvent cement to make PVC Jo ints | Flame retardant, will not support combustion in the presence of an ignition source | Maximum Service Temperature Rated at (140F) +60C | Use approved PVC primer and solvent cement to make PVC Joints | Flame Retardant, will not support combustion in the presence of an ignition source | Hand tighten plus a half turn provides a complete seal | Injection molded in Non-Toxic durable White Polyvinyl Chloride (PVC). | High chemical resistance to nearly all acids, alkalis, alcohols, halogens, and other corrosive media | Teflon tape is recommended for threaded joints | High chemical resistance to acids, alkalis, alcohols, halogens, and other corrosive media
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS41a450f7-4715-42a7-a9aa-0cdc3653c911 | Manufacturer Web Site: https://canplas.com/ | Manufacturer Web Site: http://www.canplas.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.