8 C900XST 8.99-9.30X8.55-8.75 1506
SKU: 7679097
ROBAR 1506 Straight and Transition couplings are used to make a non-restrained connection between two pipes of the same nominal size but with same or different ODs. Used in areas where corrosion is a factor, the 1506 body is Epoxy coated with Stainless Steel fasteners.
Center Sleeve: Cast Ductile Iron | Torque: 70-80 ft. lbs. | Coating: Corrosion Protective Epoxy coating | Fasteners: 5/8” NC T304 Stainless Steel | Nuts coated with anti-galling compound | Working pressures : 2″ through 12″ – 300 PSI; 14″ through 24″ – 150 PSI | End Rings: Cast Ductile Iron | Gaskets: Nitrile (NBR) Rubber (Other compounds available)
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS22ae863c-4092-4b5c-a127-a3c7a38f5343 | Installation Manual: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS366da869-0114-4bc3-afbc-c7225e2710cb | Manufacturer Web Site: http://robarindustries.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.