1-1/2HXH ABS EXPANSION JOINT
SKU: 7629085
Installed in an ABS drain, waste, and vent piping system pipe to compensate for expansion and contraction.
Service temperature rated at -40 degrees C (-40 F) to +80C (180F) | hub connections can be single step ABS solvent cemented | Injection molded in durable ABS plastic and provided with a n itril buna neoprene O-Ring and PQAA grease #2 lubricant | For use in both the drainage and venting sections of the plumbing installation in straight runs of 30 feet or longer | Type 1 allows for up to 3" (7.6cm) of travel | Flow direction and proper degree of extension ind icated on the Expansion Jo int | Approved for both Vertical and Horizontalinstallations | Injection molded in durable ABS plastic and provided with a Nitril Buna Neoprene O-Ring and PQAA Grease #2 Lubricant | For use in both the drainage and venting sections of the plumbing installation in straight runs of 30 Feet or longer | Hub connections can be single step ABS solvent cemented | Service temperature rated at -40 Degrees C (-40 F) to +80C (180F) | Flow direction and proper degree of extension indicated on the Expansion Joint | Approved for both Vertical and Horizontal Installations | Injection molded in durable ABS plastic and provided with a nitrile buna neoprene O-Ring and PQAA grease #2 lubricant
Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS7214fd90-7c3c-4ca5-a047-4a341a0bf5d8 | Manufacturer Web Site: https://canplas.com/ | Manufacturer Web Site: http://www.canplas.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.