Deliver precise watering for up to 4 individual plants with the Hydroport™ Adjustable Flow Bubbler. The non-pressure compensating emitter has a 1/2 in. FPT inlet which screws onto an underground sprinkler riser. Bubbler comes equipped with 4 barbed swivel outlets that connect to 1/4 in. distribution tubing (A220 and A250) or 1/4 in. DuraFlo™ JR dripline; rotating outlets allow tubing to be positioned as desired. The discharge rate of each adjustable outlet can be individually set from 0 to 20 GPH. The Hydroport Bubbler features a built-in removable filter to help prevent clogging. Filter can be cleaned to extend the system lifespan. Made of ABS plastic treated with UV inhibitors to prevent fading and cracking.
Drip irrigation waters plants efficiently, reducing water usage by up to 70% compared to conventional sprinkler irrigation. Drip irrigation systems are easy to install, operate, and maintain, and can easily be automated. With proper installation of a drip system, water is delivered precisely to where plants need it most, and plants get the hydration they need for optimal growth and overall health.
NDS is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of professional landscapers since 1972. The company offers a wide selection of water management solutions engineered for performance, durability, and ease of installation. For more information and technical support, visit the NDS Pro website
Four barbed swivel outlets enable tubing to be positioned where desired | Ideal for landscaped perimeters and garden areas; can be used above grade or below grade in an emitter access box | Converts an underground sprinkler system to a micro irrigation drip system that waters up to 4 plants with variable flow rates per outlet | Each outlet has an individually adjustable discharge rate from 0 to 20 GPH; turn dial with coin or flathead screwdriver to adjust rate | Comes with ten Hydroport™ Adjustable Flow Four-Outlet Bubblers | As part of a complete drip system, the bubbler delivers low volume irrigation to the plant’s root zone; with a non-pressure compensating emitter, the longer the run the lower the volume of output as water travels further away from the water source | Designed to work with standard drip irrigation water pressures up to 50 PSI | Connect the 1/2 in. FPT inlet to a 1/2 in. MPT connection point on an underground sprinkler riser; 4 barbed outlets connect to 1/4 in. distribution tubing (A220 and A250) or 1/4 in. Dura Flo™ JR dripline | Built-in removable filter helps prevent clogging and can be cleaned to extend system lifespan | Converts a sprinkler riser into a multi-outlet, low-flow drip irrigation emitter
Manufacturer Product Page: https://www.ndspro.com/us/en/product/irrigation/multiple-outlet-emitters/hpam-4-hydroport-adjustable-flow-bubbler-four-outlets-from-0-to-20-gph-1-2-in-fpt-inlet-10-pack | Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS2f3d0152-a691-4a07-98d7-a5e1198ce6d0 | Installation Manual: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS599a25c2-fd85-481f-a2f2-355426292656 | Installation Manual: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS8cb98001-241e-4913-b84b-6b07d310c16d | Manufacturer Web Site: http://www.ndspro.com
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.