C Cutter 1" (25 mm)

Ridgid "C" cutter for use with C-4, C-6, C-7, C-8, and C-9 | One half inch cable best for 3" to 4" lines | High-handle height during transport | Easy movement to and from the job site with heavy-duty, large wheels easily navigate over bumps and up stairs | The drum will stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to operator when blockages are encountered | "Solid Core” Cable - uses tough 3⁄8" (10 mm) or 1⁄2" (12 mm) Integral Wound (IW) solid core cable that is rugged and kink resistant. | Cable Control System - causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to operator when blockages are encountered. | Retractable Handle - high-handle height during transport. | 3/8" (10 mm) cable best for 1 1/2" to 3" (40 mm to 75 mm) lines. | Integrated Transport Cart - Easy movement to and from the job site. Heavy-duty, large wheels easily navigate over bumps and up stairs. | AUTOFEED® Control - offered as an accessory, this patented, automatic cable feed powers cable in and out of the drain. Reverse the direction of the AUTOFEED and the cable feeds back into the drum. | 1/2" (12 mm) cable best for 3" to 4" (50 mm to 110 mm) lines.