WELLZONE 2W-150
SKU: 1545755
The WellZone™ digital controller provides pressure control for single phase 2-wire submersible well pump applications. It uses a 0-150 PSI pressure transducer to monitor the discharge pressure and turns the pump ON and OFF according to the Start and Stop setpoints. The LCD display is visible through the clear cover of the enclosure to allow for quick view of the system pressure, run status, hours run and pump cycles. The rotary button provides the user with a simple navigation method through the menu and program settings. It features built in pump protection including rapid cycling and dry run. It is preprogrammed to run the pump as the pressure drops below 40 PSI and stop as the pressure rises above 60 PSI. High & Low pressure settings are available with an auxiliary alarm relay.
Alarm history | Includes a 0-150 PSI pressure transducer (No pressure switch needed) | LCD display with bar graph | Water filter replacement notification | Adjustable pressure set points | Well recharge timer | Rapid cycle protection | Dry Run protection
Manufacturer Product Page: https://www.sjerhombus.com/products/wellzone-pressure-controller/ | Manufacturer Web Site: https://www.sjerhombus.com/ | Brochure: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DSd7d5e498-d8c8-4da5-bf9b-bf67780560da | Specification Sheet: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS5573dec6-f345-4276-86b8-82034e124747 | Installation Manual: https://productcatalog.sheret.com/DocServer/DSAnonDownloadServlet?action=download&type=product-artifacts&key=DS62dc317f-d4c6-495e-a756-4ec71587de13 | Manufacturer Web Site: http://www.sjerhombus.com/support_options/troubleshooting
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.